The Army Combat Uniform, also known as the Airman Combat Uniform (ACU) and its flame-retardant variant, the Flame-Resistant Army Combat Uniform (FRACU), are the current battle uniforms worn by the United States Army. The ACU is also worn by some units of the U.S. Air Force.
First unveiled in June 2004, it is the successor to the Battle Dress Uniform (BDU) and Desert Camouflage Uniform (DCU) worn from the 1980s and 1990s through the early 2000s, respectively. The ACU and its component materials are manufactured by the existing industrial infrastructure which produced the now-obsolete BDU. Official military-grade ACUs are made of 50% nylon and 50% cotton. All other blends are not official issue.
Video Army Combat Uniform
History
2004: Development
In early 2004, some U.S. Army soldiers in Iraq were issued the "Close Combat Uniform" a variant of the Desert Camouflage Uniform (DCU) that featured new innovations such as shoulder pockets affixed with hook-and-loop "Velcro" fasteners, chest-worn rank insignia, and a new collar. The experimental features used on the CCU were eventually incorporated into the ACU, which was announced to the public in June 2004.
2005: Initial fielding
The process of replacing the U.S. Army's woodland pattern BDU (in use since the early 1980s) and DCU with the ACU was to begin in April 2005. However, the fielding process began two months earlier through the Rapid Fielding Initiative.
Soldiers from the 48th Infantry Brigade Combat Team were the first U.S. Army unit, active or reserve, to receive the ACU, subsequently deploying the entire Brigade into OIF combat in May 2005. Initial reception of the ACU was mixed, with complaints of insufficient durability and excessive maintenance.
2005: Universal Camouflage Pattern (UCP)
The ACU originally used the Universal Camouflage Pattern (UCP), which used a pixelated pattern of tan, gray and green (Desert Sand 500, Urban Gray 501 and Foliage Green 502) and was intended to work equally in desert, woodland, and urban environments. It is aesthetically similar to the USMC's MARPAT and Canadian CADPAT camouflage scheme on which it was based. The shade black was omitted from the uniform since it is highly visible both to the naked eye and to modern optics. Pure black, when viewed through night vision devices, appears excessively dark and creates an undesirable high-contrast image. The pattern proved to be ineffective in certain environments, and is thus scheduled to be fully phased out by 30 September 2019.
2010: Operation Enduring Freedom Camouflage Pattern (MultiCam)
Beginning in late 2010 U.S. Army soldiers deployed to Afghanistan (starting with the 173rd Airborne Brigade) were issued an Army-developed variant of the Crye Precision "MultiCam" pattern, which was seen as far more effective in Afghanistan's terrain. These flame-retardant uniforms are designed to prevent third-degree burns, along with up to thirty percent of second degree burns. Additionally, the uniforms are treated with the chemical permethrin to help protect soldiers from insect-borne diseases like malaria. Some U.S. Army soldiers during the latter stages of the Iraq War also wore the ACU in MultiCam; some were seen wearing them as late as December 2011, when the United States withdrew its military forces from the country at the end of the war. This particular version has been replaced by the newer ACU in the Operational Camouflage Pattern, as described below.
2014: Operational Camouflage Pattern (OCP)
In May 2014, the Army unofficially announced that the Operational Camouflage Pattern (OCP) would replace UCP on the Army Combat Uniform. The original "Scorpion" pattern was developed at United States Army Soldier Systems Center by Crye Precision in 2002 for the Objective Force Warrior program. Crye later modified and trademarked their version of the pattern as MultiCam, which was selected for use by U.S. soldiers in Afghanistan in 2010. After talks to officially adopt MultiCam broke down over costs in late 2013, the Army began experimenting with the original Scorpion pattern, creating a variant code named "Scorpion W2", noting that while a pattern can be copyrighted, a color palette cannot and that beyond 50 meters the actual pattern is "not that relevant." The pattern resembles MultiCam with muted greens, light beige, and dark brown colors, but uses fewer beige and brown patches and no vertical twig and branch elements. On 31 July 2014, the Army formally announced that the pattern would begin being issued in uniforms in summer 2015. The official name is intended to emphasize its use beyond Afghanistan to all combatant commands, with a family of versions including a dark jungle-woodland variant and a lighter pattern for deserts to follow. The UCP pattern is planned to be fully replaced by the OCP on the ACU by 1 October 2019. ACUs printed in OCP first became available for purchase on 1 July 2015, with deployed soldiers already being issued uniforms and equipment in the new pattern.
Maps Army Combat Uniform
Components
The Army Combat Uniform features hook-and-loop fasteners, also known by the genericized trademark Velcro, on its sleeve pockets.
Jacket
The ACU jacket originally used hook-and-loop-backed attachments to secure items such as name tapes, rank insignia, and shoulder patches and tabs, as well as recognition devices such as the U.S. flag patch and the infrared (IR) tab. Originally only pin-on skill badges were authorized for wear on the ACU, with no more than 5 at any one time.
In the summer of 2011, regulations were changed to allow for wearing of sew-on embroidered skill badges like the ones worn on the older BDUs. The 5-badge limit remained in effect, and there could be no mixing of sew-on and pin-on badges. At the same time, the US Army nametape, personal nametapes, and rank insignia could be sewn-on at the wearers preference. Skill tabs, such as the President's Hundred Tab, Special Forces, Ranger, and Sapper are worn on the left sleeve pocket flap, and are subject to a 3-tab-only rule. A tab that is an integral part of a unit patch, such as the "Mountain" or "Airborne" tab, is not counted against the rule. The U.S. Army Chaplain insignia is the only authorized branch insignia to be worn on the ACU. It is centered 1/8 inch above the right name tape. The insignia may be the metal pin-on variety or the black embroidered insignia on digitized fabric with Velcro fasteners.
Near Infrared (NIR) Signature Management Technology is incorporated to minimize the infrared silhouette. Permanent IR IFF squares are sewn to each shoulder to help identify friendly personnel when night vision devices are used, and are protected by Velcro tabs in garrison or when not in use.
Three U.S. flag insignia are authorized for wear with the ACU: full-color, full-color IR, and subdued IR. The U.S. flag insignia (full-color or subdued) is worn on the right shoulder pocket flap of the ACU coat. The subdued version is only worn as directed under tactical or field conditions. On the right shoulder of the ACU, the U.S. flag is depicted with the union (stars) to the viewer's right, instead of the usual left (flag's own right); this is to give the impression of the flag moving forward with the wearer. Subdued shoulder sleeve insignia are always worn.
The jacket's Mandarin collar was intended to be worn up in combat to fit with the Improved Outer Tactical Vest (IOTV) body armor, and worn in the down position otherwise. With the change of pattern to OCP, the Velcro tab that closed the Mandarin collar was removed, along with other Velcro closures.
The front closure is zippered and reinforced with Velcro, designed for use with OTV. The tilted chest pockets, cuffs, and elbow pad insert pockets also utilize hook-and-loop closure. There is a three slot pen pocket on the left arm of the jacket, and blouse bellows for increased mobility. The jacket is worn so that it bottom is between the bottom of the pocket and the top of the cargo pocket.
In the field, the jacket may be replaced by the flame resistant Army Combat Shirt when worn directly under the IOTV.
Trousers
The ACU trousers (or ACU pants) are worn with a two-inch nylon web belt, and feature Velcro pouches for knee pad inserts, two forward-tilted thigh storage pockets with elastic drawstring and Velcro for closure during movement, and two calf storage pockets one on each pant leg with a Velcro closure. Army Combat trousers with flame resistant materials are being issued for use in Iraq and Afghanistan.
The updates to the ACU trousers in late 2010 included removal of Velcro fasteners from forward-tilted thigh cargo pocket flaps which were replaced with 3 buttons. This change was introduced gradually from 2009 onward and is now in full effect. Two buttons are standard (same function as on BDU trouser cargo pockets), while the third button located at the very end of the pocket can be used to allow for more load and extra volume in cargo pockets. On the small calf pockets the 3-piece Velcro (2 square hook on pocket and one rectangular loop patch on the flap) have been replaced with a single button in 2012. Buttons were re-introduced and replaced Velcro on pockets after numerous complaints from soldiers in the field.
The belt loops are of new design, much wider (double width) and there is 8 of them now compared to 7 in the past. The waist adjustment cord has been removed and replaced by the Velcro waistband fine-adjusters, one at each hip. Instead of a knee pocket which could only accommodate soft knee inserts in the past, the knee area now features multi-layered comprehensive design which allows external hard-type knee pads to be inserted and secured. Back of the knee area has Velcro hook and loop patches to further secure knee inserts around the knee area. Cuffs at the bottom of the trousers do not use drawstrings anymore for blousing; those have been again replaced by the Velcro cuff adjusters. Further changes as part of the transition to OCP removed the pockets for insertable knee pads altogether, along with the replacement of more Velcro with buttons.
To be able to differentiate the FRACU from ACU at a distance, a small square inch tan patch is affixed to the left sleeve cuff on the jacket and the middle of the left cargo pocket flap on the trousers.
Headgear
Typically, the ACU is worn with the Advanced Combat Helmet, a patrol cap, or a boonie hat and/or fleece cap as appropriate in winter months. The patrol cap is a kepi-styled straight-sided, flat-topped soft cap, with a double thick bill and internal pocket. When in garrison, the maroon, tan, and green berets may be worn by paratroopers, Army Rangers, and Army Special Forces respectively. The green micro fleece cap is authorized for field and garrison use outside of unit PT, per local command. A name tape is worn on the back of the patrol cap. Sew-on rank is recommended but pin-on rank is authorized on the ACU Patrol Cap and ACU Boonie Hat. The MICH (Modular Integrated Communications Helmet) Camouflage cover rank must be sewn on if worn but is often not used as the night vision device mount would obstruct it.
T-shirt
The ACU is worn with a moisture-wicking sand colored T-shirt. A coyote brown T-shirt is authorized with OCP ACUs, and will become the sole authorized T-shirt upon completion of the full transition to OCP in 2019.
Footwear
The ACU is worn with tan Army Combat Boots and olive drab cotton socks. Commercial versions of this boot are authorized without limitation, complying with the following regulations--must be 8 to 10 inches in height, be made of tan rough side out cattle hide leather with a plain toe and tan rubber outsoles, and be without zippers, metal cleats, or side tabs. The Mountain Combat Boot is available for difficult terrain, and the Extreme Cold Vapor Barrier Boots for cold weather. As with the T-shirt, coyote brown boots are authorized with OCP and will become the sole boot authorized following the completion of the transition in 2019.
See also
- Airman Battle Uniform
- Marine Corps Combat Utility Uniform
- Navy Working Uniform
- List of camouflage patterns
- Uniforms of the United States Army
- U.S. Army Service Uniform
References
Further reading
- Army testing combat boots, camouflage patterns
External links
- Program Executive Office (PEO) Soldier
- PEO Soldier- Army Combat Uniform Factsheet
- PEO Soldier- Army Combat Uniform FAQ
- GlobalSecurity.org page on ACU (with pictures)
- ACU Brief (ArmyStudyGuide.com) - details of proper wear and care of the ACU
- Army page on ACU
- 48th Brigade Combat Team - First Field Reports on ACU
- [1] Soldiers to test new Army Combat pants Army Times
Source of the article : Wikipedia
0 Comments